NEOPRENE (CR) COATED POLYESTER FABRIC
The Neoprene coated polyester fabric combines the following properties:
- CR or Chloroprene Rubber, commonly known as Neoprene ®, was the best option to manufacture products that are to be in contact with oils and fuels in the past. Nowadays, Neoprene is considered to have a moderate resistance to these components. However, Chloroprene Rubber can be considered a mix solution as it has better resistance to a diverse source of degrading agents (like oil, ozone, chemicals and heat) than Natural Rubber. Instead Neoprene® presents lower physical properties. In spite of the physical properties, Neoprene® has a perfect airtightness, therefore it is widely used in the manufacture of inflatable structures of all sort. Its resistance to fire is also excellent, and can be presented in self-extinguishing formulations if required.
- Polyester is a the synthetic fiber that detains the first place in terms of global production. It is a linear polymer whose mass comprises predominantly (at least 80%) of the ester functions and terephthalic acid. The polyester yarn is lightweight and flexible. It is resistant to ultraviolet radiation. Low flammability. It softens at 245 ° C and melts at 250 ° C. It keeps a good shape memory and can therefore be used into coated fabrics composition. Furthermore, a suitable weaving also allows good heat dissipation.
Our design office will assist you in defining your Neoprene coated polyester fabric.
| General Properties | min - max |
|---|---|
| Warp breaking strength | 90 - 2000 daN/5cm |
| Weft breaking strength | 80 - 1400 daN/5cm |
| Warp elongation at break | 10% - 20% |
| Weft elongation at break | 10% - 20% |
| Weight per sqm | from 450 gr/m2 |
| Thickness | Upon request |
| Peeling strength | Upon request |
| Continuous Temperature | -35 C° à 95C° |
| Point Temperature | -35 C° à 105C° |
Properties
Fireproofed
Acids resistance
Non-skid
UV resistance
Water resistance
Airtightness
Isolation to radiation| General Properties | min - max |
|---|---|
| Warp breaking strenght | 90 - 2000 daN/5cm |
| Weft breaking strenght | 80 - 1400 daN/5cm |
| Warp elongation at break | 10% - 20% |
| Weft elongation at break | 10% - 20% |
| Weight per sqm | 90 - 1100 |
| General Properties | min - max | |
|---|---|---|
| Hardness ShA | 30 - 90 ShA | |
| Hardness IRHD | 30 - 90 IRHD | |
| Tensile Strength | 8 Mpa - 20 Mpa | |
| Elongation at break | 100% - 900% | |
| Operating temperature | ||
| Continuous Temperature | -35 C° - 95C° | |
| Point Temperature | -35 C° - 105C° | |
| Resistance | ||
|---|---|---|
| Solvent resistance | ||
| Acid resistance | ||
| oxygen ageing | ||
| Ozone ageing | ||
| light ageing | ||
| Cold ageing | -- | |
| heat ageing | -- | |
Available colors :
Fireproofing option.
- Industrial fabrics,
- straps,
- tarps,
- tires,
- rope,
- clothing,
- protective bellows,
- inflatables,
- CBRN suits,
- thermic insulation combinations.
Ask for information
The company Colmant Coated Fabrics, as Data controller, undertakes to respect the law n ° 78-17 of January 6, 1978 modified relating to data processing, the files and the freedoms with regard to the automated processing of data personal information and Regulation (EU) No 2016/679 of 27 April 2016 from its application on 25 May 2018. The information collected on this form is recorded in a computerized file by Colmant Coated Fabrics to prepare your quotation or answer to a contact request. They are kept the time that our services interest you. In accordance with the Data Protection Act, you can exercise your right of access to your data and have it corrected or cancelled by contacting Colmant Coated Fabrics 44 rue louis Braille 59370 Mons-en-Baroeul or by our personal data management form.
The data and / or information on our website are indicative and are not contractual. Colmant Coated Fabrics reserves the right to modify them at any time without prior notice.